Topaz Video AI 5.0.4 macOS
Time-aware video quality enhancement. Video Enhance AI uses information from multiple frames to achieve high-end results for video upscaling, denoising, deinterlacing, and restoration. Improving the quality of videos is substantially more complex than photos because of motion-related issues like flickering, blockiness, and wavy artifacts. To solve this issue, Video Enhance AI looks at surrounding frames to improve resolution and reduce motion artifacts for natural results.
Upscaling
Upscale video resolution with detail gathered from multiple frames. Our video upscaler can convert SD to HD and HD to 4k or 8k while adding crisp and natural video details.
Denoising
Remove noise and grain while recovering real detail in your videos. Minimize flickering and other temporal artifacts caused by frame-by-frame denoising approaches.
Deinterlacing
Use deep learning to convert interlaced videos to progressive while preserving image definition. Significantly reduces visual artifacts compared to traditional deinterlacing.
Restoration
Naturally restore old videos without adding visual artifacts. Restore realistic details and remove compression artifacts from old or degraded sources.
Frame rate conversion for 2021
Introduced in v2.3, the Chronos AI model uses deep learning to increase video frame rate without artifacts. Existing methods like frame blending and optical flow are decades old and produce inconsistent and unnatural results. Video Enhance AI generates new frames that are often indistinguishable from frames captured in-camera, enhancing videos with more natural results.
Increase video frame rate (24 to 60 FPS, 30 to 60 FPS)
To increase your video’s frame rate, you’ll need to generate new frames between your video’s existing frames. The existing ways to do this (frame blending, optical flow) often look unnatural and jittery especially with moving backgrounds. Video Enhance AI uses a new approach based on machine learning to “predict” the best intermediate frame between existing ones, which gives you much better results with a wider variety of material.
Create a smooth slow-motion effect
When you create a slow motion effect, it’s even more important that you generate new frames without stuttering or motion artifacts. Video Enhance AI creates much more natural slow motion results compared to traditional time interpolation.
Fewer motion artifacts
Other video upscaling techniques often create a “shimmering” or “flickering” effect from different processing in adjacent frames. VEAI is trained to significantly reduce such artifacts.
Recover video details
VEAI has been trained to inject real details into your videos, derived from the additional information in multiple adjacent frames, allowing us to deliver superior video enhancement.
Get more natural results
Traditional upscaling often causes artifacts. While visual artifacts do exist in VEAI too, they’re mitigated by information derived from multiple frames.
Trained on videos
VEAI was trained exclusively on video clips instead of still images. (The improved results are worth the increased effort to gather the dataset!)
Optimized for your hardware
We work directly with different hardware manufacturers to ensure the software works as fast as possible on your machine.
Convenient workflow
Easily convert and combine multiple videos from SD to HD, HD to 4k, and much more. Includes export presets and batch processing.
Flexible import / export
Supports common video file types and image sequence as input, and export directly to mp4, mov, or image sequence.
Batch processing
Leave Video Enhance AI running overnight with your videos queued up, and come back in the morning to enhanced footage.
Compatibility: macOS 10.12 or later.
Homepage https://www.topazlabs.com/topaz-video-ai
May 16, 2024 3:35 am
works great
May 16, 2024 2:09 pm
how can you install models??
May 16, 2024 6:00 pm
If it’s like the other Topaz programs, install it, get the models and then run the crack and block it from the internet.
May 18, 2024 3:46 am
bingo
May 19, 2024 11:26 am
so.
1. install
2. open program
3. install models
4. close program
5. run script on terminal
6. block network
right?
May 16, 2024 1:36 pm
How do you figure it works fpvguy? Script is flawed. Have you tried running it? It only works in trial mode with a watermark.
May 18, 2024 3:45 am
function hex() {
echo ”$1” | perl -0777pe ‘s|([0-9a-zA-Z]{2}+(?![^\(]*\)))|\\x${1}|gs’
}
function replace() {
declare -r dom=$( hex $2 )
declare -r sub=$( hex $3 )
sudo perl -0777pi -e ‘BEGIN{$/=\1e8} s|’$dom’|’$sub’|gs’ “$1”
return
}
function prep() {
sudo xattr -cr “$1”
sudo xattr -r -d com.apple.quarantine “$1”
sudo codesign –force –deep –sign – “$1”
}
function patch() {
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘A3030054’ ‘55000014’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8297000000’ ‘660F1F440000’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8430060000’ ‘E93106000000’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0” ‘020054200080’ ‘020054000080’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0” ‘B0014180’ ‘B0004180’
}
patch
prep “/Applications/Topaz Video AI.app”
paste that into terminal after install.. it works just tested
May 16, 2024 2:04 pm
fpvguy – How can you say it works great? Have you even tried to upscale a video?
The script doesn’t work. You would know that if you tried it and quit posting stupid comments saying it works.
May 19, 2024 4:10 pm
yes mate. im constantly upscaling my drone footage to improve its quality while maintaining a low bitrate.
May 17, 2024 6:04 am
It dosn’t work. crack is not working.
May 17, 2024 4:33 pm
You think they would test these apps before they uploaded them when you?
May 17, 2024 2:10 pm
Worthless without correct script – DELETE
May 18, 2024 1:33 pm
fpvguy
When I copy and paste your script in Terminal, I get this error
“zsh: event not found:”
May 19, 2024 3:43 pm
Just replace the below two lines in the original text provided with the downloaded file.
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0” ‘020054200080’ ‘020054000080’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0” ‘B0014180’ ‘B0004180’
May 19, 2024 1:32 pm
Ya, fpvguy – your script doesn’t work for me either. It comes up with “event not found”
May 20, 2024 1:40 am
This work for me:
function hex() {
echo -n “$1” | perl -0777pe ‘s|([0-9a-zA-Z]{2}+(?![^\(]*\)))|\\x${1}|gs’
}
function replace() {
local dom=$( hex “$2” )
local sub=$( hex “$3” )
sudo perl -0777pi -e ‘BEGIN{$/=\1e8} s|’$dom’|’$sub’|gs’ “$1”
return
}
function prep() {
sudo xattr -cr “$1”
sudo xattr -r -d com.apple.quarantine “$1”
sudo codesign –force –deep –sign – “$1”
}
function patch() {
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘A3030054’ ‘55000014’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8297000000’ ‘660F1F440000’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8430060000’ ‘E93106000000’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0.dylib” ‘020054200080’ ‘020054000080’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0.dylib” ‘B0014180’ ‘B0004180’
}
patch
prep “/Applications/Topaz Video AI.app”
May 20, 2024 3:29 pm
Run your script I get this;
patch
prep “/Applications/Topaz Video AI.app”
zsh: event not found: [
May 20, 2024 4:19 pm
fixed – Try this
function prep() {
sudo xattr -cr “$1”
sudo xattr -r -d com.apple.quarantine “$1”
sudo codesign –force –deep –sign – “$1”
}
function patch() {
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘A3030054’ ‘55000014’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8297000000’ ‘660F1F440000’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8430060000’ ‘E93106000000’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0.dylib” ‘020054200080’ ‘020054000080’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0.dylib” ‘B0014180’ ‘B0004180’
}
patch
prep “/Applications/Topaz Video AI.app”
May 21, 2024 1:06 pm
This still doesn’t work XXX
Here’s what I got when I run your script
patch
prep “/Applications/Topaz Video AI.app”
patch:1: command not found: replace
patch:2: command not found: replace
patch:3: command not found: replace
patch:4: command not found: replace
patch:5: command not found: replace
Password:
xattr: No such file: ““/Applications/Topaz”
xattr: No such file: ““/Applications/Topaz”
Usage: codesign -s identity [-fv*] [-o flags] [-r reqs] [-i ident] path … # sign
codesign -v [-v*] [-R=|-R ] path|[+]pid … # verify
codesign -d [options] path … # display contents
codesign -h pid … # display hosting paths
codesign –validate-constraint path … # check the supplied constraint plist
May 21, 2024 2:42 pm
I give up with this version. I am going back to version 5.0.3
I’m tired of installing 5.0.4 it and finding out that none of these scripts work then having to revert back to 5.0.3
May 22, 2024 4:21 am
Finally I succeeded.
First, you need to modify “” in the script written here. “”in the post and “”in the terminal are different.
It is easier to just change all 1.3.3 to 1.4.0 in the attached file.
Here’s how to use it:
1. Installation
2. Run the program
3. When the active window appears, do not touch anything and just download the models.
4. After downloading the model, exit the program.
5. Run command in terminal
6. Block all network access of the program with a firewall.
7. Success
July 24, 2024 10:34 pm
Thanks ! It worked
May 22, 2024 10:12 pm
Guys, he’s literally means replace the apostraphes and commas. If you take into Sublime you’ll see it has the wrong ASCII for the syntax. Here’s the correct code with correct ‘ and ”
function hex() {
echo -n “$1” | perl -0777pe ‘s|([0-9a-zA-Z]{2}+(?![^\(]*\)))|\\x${1}|gs’
}
function replace() {
local dom=$( hex “$2” )
local sub=$( hex “$3” )
sudo perl -0777pi -e ‘BEGIN{$/=\1e8} s|’$dom’|’$sub’|gs’ “$1”
return
}
function prep() {
sudo xattr -cr “$1”
sudo xattr -r -d com.apple.quarantine “$1”
sudo codesign –force –deep –sign – “$1”
}
function patch() {
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘A3030054’ ‘55000014’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8297000000’ ‘660F1F440000’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8430060000’ ‘E93106000000’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0.dylib” ‘020054200080’ ‘020054000080’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0.dylib” ‘B0014180’ ‘B0004180’
}
patch
prep “/Applications/Topaz Video AI.app”
May 23, 2024 4:25 pm
this is what I get when running your script above.
-bash: ’??: command not found
-bash: gs’: command not found
-bash: ’??: command not found
Password:
Sorry, try again.
Password:
Unrecognized character \xE2; marked by <– HERE after <– HERE near column 1 at -e line 1.
-bash: ’??: command not found
-bash: ’??: command not found
-bash: gs’: command not found
Unrecognized character \xE2; marked by <– HERE after <– HERE near column 1 at -e line 1.
-bash: ’??: command not found
-bash: ’??: command not found
-bash: gs’: command not found
Unrecognized character \xE2; marked by <– HERE after <– HERE near column 1 at -e line 1.
-bash: ’??: command not found
-bash: ’??: command not found
-bash: gs’: command not found
Unrecognized character \xE2; marked by <– HERE after <– HERE near column 1 at -e line 1.
-bash: ’??: command not found
-bash: ’??: command not found
-bash: gs’: command not found
Unrecognized character \xE2; marked by <– HERE after <– HERE near column 1 at -e line 1.
May 23, 2024 4:23 pm
I ran your script and I still get this error message
” zsh: event not found: [ “
May 23, 2024 4:26 pm
This is the last script that works with 5.0.3
function hex() {
echo ”$1” | perl -0777pe ‘s|([0-9a-zA-Z]{2}+(?![^\(]*\)))|\\x${1}|gs’
}
function replace() {
declare -r dom=$( hex $2 )
declare -r sub=$( hex $3 )
sudo perl -0777pi -e ‘BEGIN{$/=\1e8} s|’$dom’|’$sub’|gs’ “$1”
return
}
function prep() {
sudo xattr -cr “$1”
sudo xattr -r -d com.apple.quarantine “$1”
sudo codesign –force –deep –sign – “$1”
}
function patch() {
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘A3030054’ ‘55000014’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8297000000’ ‘660F1F440000’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8430060000’ ‘E93106000000’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.3.15.dylib” ‘020054200080’ ‘020054000080’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.3.15.dylib” ‘B0014180’ ‘B0004180’
}
patch
prep “/Applications/Topaz Video AI.app”
May 23, 2024 4:49 pm
Apap method works flawlessly. I was ready to downgrade after so many tries, but his method works!
May 24, 2024 1:29 pm
NOT worth the BS for a very minor upgrade from 5.0.3
May 24, 2024 2:32 pm
My apologies, the browser or site is altering the text to use the fancy quotes and apostrophes. You need to find and replace all of them or manually do it, but you need it to be standard, not the fancy left or right kind. Sublime Text for macOS is a good one, or just a standard notepad.
I also had to change the libvideoa at the bottom to read a newer version.
Regardless, the issue is the ” and ‘
May 30, 2024 10:27 am
i can run the script successfully. But it seems it block all connection. Before i run the script i let the app download model but i didn’t click export and exit the app. After that i run the script and open the app again. But when i click export nothing happen.
May 30, 2024 5:38 pm
I have exactly this issue too.
June 1, 2024 7:41 pm
Worked for me on first try. Weird to see many having issues. Didn’t have to change anything.
June 7, 2024 2:18 pm
Monii – I guess you’re the only one that works for?
June 8, 2024 11:33 am
This script works people
function hex() {
echo ”$1” | perl -0777pe ‘s|([0-9a-zA-Z]{2}+(?![^\(]*\)))|\\x${1}|gs’
}
function replace() {
declare -r dom=$( hex $2 )
declare -r sub=$( hex $3 )
sudo perl -0777pi -e ‘BEGIN{$/=\1e8} s|’$dom’|’$sub’|gs’ “$1”
return
}
function prep() {
sudo xattr -cr “$1”
sudo xattr -r -d com.apple.quarantine “$1”
sudo codesign –force –deep –sign – “$1”
}
function patch() {
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘A3030054’ ‘55000014’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8297000000’ ‘660F1F440000’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8430060000’ ‘E93106000000’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.dylib” ‘020054200080’ ‘020054000080’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.dylib” ‘B0014180’ ‘B0004180’
}
patch
prep “/Applications/Topaz Video AI.app”
June 16, 2024 12:06 am
none of the scripts posted here work with version 5.0.4. even if one of the scripts runs without errors, the program then only runs in demo mode and always generates a watermark when rendering. I have already tried to uninstall everything (mot “App Cleaner & Uninstaller”), but that doesn’t help either.
June 27, 2024 1:28 pm
Just delete it already, please it doesn’t work
July 9, 2024 11:35 am
It works for my M1 Mac.
Script I used.
function hex() {
echo ”$1” | perl -0777pe ‘s|([0-9a-zA-Z]{2}+(?![^\(]*\)))|\\x${1}|gs’
}
function replace() {
declare -r dom=$( hex $2 )
declare -r sub=$( hex $3 )
sudo perl -0777pi -e ‘BEGIN{$/=\1e8} s|’$dom’|’$sub’|gs’ “$1”
return
}
function prep() {
sudo xattr -cr “$1”
sudo xattr -r -d com.apple.quarantine “$1”
sudo codesign –force –deep –sign – “$1”
}
function patch() {
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘A3030054’ ‘55000014’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8297000000’ ‘660F1F440000’
replace “/Applications/Topaz Video AI.app/Contents/MacOS/login” ‘0F8430060000’ ‘E93106000000’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0.dylib” ‘020054200080’ ‘020054000080’
replace “/Applications/Topaz Video AI.app/Contents/Frameworks/libvideoai.1.4.0.dylib” ‘B0014180’ ‘B0004180’
}
patch
prep “/Applications/Topaz Video AI.app”
I had to change “libvideoai.1.3.3.dylib” to “libvideoai.1.4.0.dylib” because this is the file that I have in my /Applications/Topaz Video AI.app/Contents/Frameworks/
Good luck!
July 13, 2024 11:20 am
Hi Admin 🙂 Can you please post version 5.2.0 of Topaz Video AI app ? It includes a lots of amazing new features. Thanx 🙂
July 15, 2024 9:51 am
Terminal asks me for a password.
???
July 24, 2024 10:33 pm
Just enter your own session password